Balcony Solar Panels
The MicroBox 800 is a plug-and-play all-in-one storage system for balcony systems consisting of an 800W microinverter and a 2kWh Li-FePO4 battery pack, which can be wirelessly stacked to connect to up to three other batteries, compatible with any solar panel.
The Balcony Solar PV Storage System is an all-in-one design that supports up to 2000W of PV output, so you can charge it with up to four 500W solar panels. In addition, this leading microinverter supports 800W of grid-connected output and 1200W of off-grid output, providing your home with reliable power during power outages.
The all-in-one battery and microinverter design simplifies your installation process, and you will have a leading balcony energy storage system in less than 10 minutes, with excess solar energy stored in the LFP battery.
Balcony Solar Panels, or balcony solar panels, are devices that are installed in balcony locations and convert solar energy into electricity for home use. Here's a closer look at it:
Structure and principle
Basic structure: It is mainly composed of tempered glass, EVA adhesive film, cell, backplane, aluminum alloy frame, junction box and silicone. Tempered glass is used to protect the cell, which requires high light transmittance and ultra-white tempering; EVA adhesive film is used to bond and fix tempered glass and cells; Cells are the core components of power generation, and the mainstream ones include crystalline silicon solar cells and thin-film solar cells. The backplane plays the role of sealing, insulation and waterproofing; The aluminum alloy frame is used to protect and support the entire assembly; The junction box is a transfer station for the current; Silicone is used to seal the junction of the component with the frame and junction box.
Working principle: When sunlight shines on the semiconductor p-n junction, a new hole-electron pair is formed, under the action of the p-n junction electric field, the holes flow from the p-region to the n-region, and the electrons flow from the n-region to the p-region, and a current is formed after the circuit is turned on, so as to realize the direct conversion of solar radiation energy into electrical energy
MPPT Input | MPPT (2000 w) |
Grid-Connected Power | 800 w |
Off-grid Input/Output | 1200 w |
PV Input Voltage | 22V-60V DC |
Capacity | 1958Wh x4 |
6000 Battery Cycles | LiFePO4 |
Waterproofing | IP65 |
Wireless Connections | Bluetooth,WLAN(2.4GHz) |
Warranty | 10 Years |
Operating Temperature | -20-55℃ |
weight | ≈25 kg |
Dimensions | 460x249x254mm |
Intelligent Temperature Control System
The wide range of temperature adaptability can be met to power your emergency loads in a wide range of situations.
Balcony Solar PV system
Powerlinkage: Power Adjustment ThroughSmart Meters or Smart Sockets, Greatlylmprovingthe Photovoltaic Self-use Rate.(up to 94%)
